Merck
CN
All Photos(1)

Documents

57300-U

Supelco

SPME fiber assembly Polydimethylsiloxane (PDMS)

df 100 μm(PDMS, needle size 24 ga, for use with manual holder

Sign Into View Organizational & Contract Pricing
All Photos(1)
NACRES:
NB.21

material

fused silica fiber
plain red hub

needle size

24 ga

packaging

pkg of 3 ×  ea

df

100 μm (PDMS)

technique(s)

solid phase microextraction (SPME): suitable

fiber L

1 cm

matrix active group

PDMS coating

application(s)

food and beverages

compatibility

for analyte group volatiles (MW 80-500)
for use with manual holder

Looking for similar products? Visit Product Comparison Guide

Related Categories

Application

Volatiles

Storage Class Code

10 - Combustible liquids

WGK

WGK 2

Flash Point(F)

609.8 °F - closed cup

Flash Point(C)

321 °C - closed cup

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

  1. Which document(s) contains shelf-life or expiration date information for a given product?

    If available for a given product, the recommended re-test date or the expiration date can be found on the Certificate of Analysis.

  2. How do I get lot-specific information or a Certificate of Analysis?

    The lot specific COA document can be found by entering the lot number above under the "Documents" section.

  3. How do I find price and availability?

    There are several ways to find pricing and availability for our products. Once you log onto our website, you will find the price and availability displayed on the product detail page. You can contact any of our Customer Sales and Service offices to receive a quote.  USA customers:  1-800-325-3010 or view local office numbers.

  4. What is the maximum temperature for the 100 micron SPME fiber assembly Polydimethylsiloxane (PDMS), Product 57300-U?

    The maximum temperature is 280°C. We recommend conditioning at 250°C.

  5. Why should I use 100 micron SPME fiber assembly Polydimethylsiloxane (PDMS), Product 57300-U?

    The 100 micron fiber is designed for low molecular weight or volatile compounds that require a thick coating for adsorption.

  6. How is the fiber attached to the guide wire for SPME fiber assembly Polydimethylsiloxane (PDMS), Product 57300-U?

    The fused silica fiber core is glued to the guide wire.

  7. What is the Department of Transportation shipping information for this product?

    Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product. 

  8. My question is not addressed here, how can I contact Technical Service for assistance?

    Ask a Scientist here.

Elvira M Gaspar et al.
Journal of chromatography. A, 1216(14), 2749-2756 (2008-11-28)
The gas chromatographic profiles of exhaled air from lung cancer patients have been investigated. The breath from healthy volunteers, smokers and non-smokers, and lung cancer patients without treatment and under radio and/or chemotherapy, was collected using Tedlar bags. Different profiles
Belinda Vallejo-Cordoba et al.
Journal of agricultural and food chemistry, 52(18), 5567-5571 (2004-09-18)
Solid phase microextraction (SPME) and gas chromatography were used for tequila volatile characterization and ethyl ester quantitation. Several factors determined the differences in tequila volatile profiles obtained by the SPME technique, namely, sampling mode, fiber coating, and fiber exposure time.
Hans-Georg Schmarr et al.
Journal of chromatography. A, 1226, 96-102 (2011-11-08)
This work describes the development of a trace level (<1 ngL(-1)) analysis of haloanisoles in complex wine matrix. The suggested method involves sample preparation based on solid phase extraction, a clean-up to remove acidic compounds, concentration of the haloanisole fraction
Araceli Peña-Alvarez et al.
Journal of chromatography. A, 1216(14), 2843-2847 (2008-12-23)
A simple method for the analysis of capsaicin and dihydrocapsaicin in peppers and pepper sauces by solid phase microextraction-gas chromatography-mass spectrometry has been developed. A novel device was designed for direct extraction solid phase microextraction in order to avoid damage
A Jiménez et al.
Journal of chromatography. A, 1028(2), 321-324 (2004-03-09)
Solid-phase microextraction was used as a technique for headspace sampling of extra virgin olive oil and virgin olive oil samples with different off-flavours. A 100 microm coated polydimethylsiloxane fiber was used to extract volatile aldehydes, the sampling temperature was 45
View All Related Papers

Articles

SPME-GC-MS Determination of Phthalate Esters in Ramen Noodle Flavor Packets

A sensitive, quantitative, and reproducible SPME-GC/MS procedure was developed by Supelco for the extraction of phthalate esters from oily food matrices, such as the flavored oils included with ramen noodle kits.

Protocols

Development of a Method for Analysis of Phthalate Esters in Vegetable Oils

Rapid, easy, sensitive method for the anaysis of PAEs, using LLE and direct immersion SPME, demonstrated good accuracy, repeatability, linearity and LOQ.

Chromatograms

suitable for GC, application for SPMEsuitable for GC, application for SPMEsuitable for GC, application for SPMEsuitable for GC, application for SPMEShow More

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service